Tag: Nepheline Syenite

Soda Fired Commercial Clays

So I wanted to see what all of my locally available commercial clay looked like in our Soda Kiln. I took 12 commercially available clay bodies tested in this base recipe to get an idea which were more likely to flash:

10 Nepheline Syenite, 10 200m Silica, 80 Clay

For good measure I threw in a few Shino glazes, and tried calcined EPK for the hell of it (I actually wanted to see if it deflocculated like the rest of them.. it didn’t really…)

From the 100g test batches, I then tested each slip/shino on Laguna 550 Porcelain, B-Mix, and Miller 510 Stoneware in 2 firings that were unfortunately pretty similar in atmosphere and soda introduction. First firing on top, 2nd on bottom. Tiles were scattered throughout the kiln, so some got blasted, others not so much.Β  Standard body reduction and reduction firing to cone 9/10, heavy reduction during soda intro, and reduction cooling from 2300-1800F. I scanned the sides that were more interesting, or showed more variation. Hope this helps you narrow down what you might be looking for with soda fired clay slips!